IceRiver KS Series Test Fixture - Kaspa Hashboard Tester

Description

A test fixture for IceRiver KS-series hashboards — the Kaspa (kHeavyHash) miners, not SHA-256 hardware. Kaspa ASICs are a small enough installed base that repair tooling for them is genuinely hard to find, which is exactly why a dead KS board so often gets binned when it did not need to be.

What it does

Powers and clocks an IceRiver KS-series hashboard on the bench, walks the chip chain and reports where it fails, so you can separate a genuinely dead board from a power, cable or control board problem before you spend anything on parts.

Listed coverage	IceRiver KS series hashboards
Algorithm family	kHeavyHash (Kaspa)
Function	Hashboard diagnostic / chip chain test

The KS line spans several models with different board layouts. Tell us which KS models you are working on and we will confirm adapter coverage on this fixture before you order — we are not going to claim blanket compatibility we have not checked.

Why this matters more for Kaspa than for Bitcoin

There is a deep secondhand market in S19 hashboards — if you cannot fix one, you can buy one. There is nothing like that depth for KS boards. Replacement parts are scarce and expensive, which means the ability to diagnose accurately and repair rather than replace is worth considerably more on this hardware than it is on Bitcoin miners. Other altcoin hardware lives in Kaspa, Aleo, Dash and CKB miners.

Condition and warranty

Condition grade and warranty terms on this fixture are not stated in the listing, so we are not going to state them here. Ask us before you order and we will confirm both in writing.

Before you order

We repair this hardware in-house, so if you are not sure the part fits, send us the model and the silkscreen part number off your board and we will check it against stock. More spares and test gear in repair parts & tools, or browse all miners.

What’s in the box

1 × IceRiver KS Series Tester Test Fixture
Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Questions buyers ask about this part

Is this a complete, working machine?

No. This listing is on the parts and repair shelf, which holds both brand-new spares and bench tools and as-is units sold for repair. Which of those this one is, is stated in the description above — read it before you order, and ask us on +1 (781) 577-0377 or ns@ingmining.com if anything about compatibility with your fleet is unclear. We would rather answer the question than take a return.

What should I check the day it arrives?

Photograph the pallet or box before you open it, keep the packaging, and run the 48-hour acceptance test straight away. Freight claim windows are short, and a fault found on day two is a conversation while a fault found on day thirty is an argument. Our own six-step bench procedure is published in full, so you can repeat exactly what we did.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — we would rather talk before you buy.

Related hardware and where this sits in the store

Parts, fixtures and tools that go with the same repair job:

Category: Need Parts.

Kaspa hardware needs its own fixture. The parts compatibility guide covers why fixture coverage is a firmware property rather than a hardware one, and what to confirm before you order.

Where this listing sits

This one is on the parts and repair shelf. That shelf holds two different things: brand-new spares and bench tools, and as-is units sold for repair. Which of the two this listing is, is stated in its own description — read it before you order.

What our grades mean

These are the only words we use, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

New	Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested working	Second-hand, and it ran on our bench at the hashrate the listing states. We measured it; we are not repeating what the last owner told us. Expect cosmetic wear.
Refurbished	Tested working, plus work done: cleaned, thermal paste and fans dealt with, failed components replaced. The listing says what was actually done to that unit rather than using the word as decoration.
As-is / for parts	Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest. If a listing says as-is, assume it does not hash until you have proved otherwise.
Untested	We have it, we have not powered it, and we are not going to pretend we did. Rarer than as-is and always stated explicitly.

What a grade here does not mean

Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on hardware that has been earning. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
A grade is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. A tested-working grade describes what the machine did on our bench, not what we owe you in six months.
A boosted hashrate is not a spec. Where a unit ships on tuned firmware we say so and we give the factory figures too, because overclocking raises power faster than it raises hashrate — a tuned machine is less efficient per terahash than stock, not more.
We will not invent a grade to fill a field. If a unit came in without history and has not been through the bench, its listing says that.

How the grade gets decided

A used-hardware seller who will not tell you how they test is asking you to take the grade on trust. Ours is published: the six-step bench procedure every machine goes through, and the five measurements that get recorded — per-board hashrate, chip count, measured wall power rather than the nameplate figure, hardware error rate, and temperature under sustained load. When it reaches you, run the 48-hour acceptance test straight away, while the freight claim window is still open.

Buying second-hand for the first time? How to buy a used ASIC miner without getting burned is the long version, written from the repair bench rather than from a spec sheet.

Shipping

Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

Then run the 48-hour acceptance test straight away, while that window is still open. It is the same ground our own bench covers, so you can compare like for like: how the grade on this listing was arrived at, and the five measurements we record, are set out in the Condition & grading tab on this page.

Condition, warranty and returns

Condition: Repair part or bench tool — this shelf holds both new spares and as-is units, so read the condition stated in the description.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. For what a mining warranty normally covers, see ASIC miner warranty explained.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

Reviews

There are no reviews yet.

Be the first to review “IceRiver KS Series Tester Test Fixture ASIC Miner Diagnostic Tool Kit”

Genuine Original Avalon 1166PRO Control Board – Not a Knock Off

K3L Multi-function Antminer Hashboard Tester S19 S21 T21 KS3 KS5 RI Probe

IceRiver KS Series Tester Test Fixture ASIC Miner Diagnostic Tool Kit

Price:

Description

What it does