Search
Previous

WhatsMiner M63S+ 414 TH/s – 17W/T Bitcoin Miner

Next

WhatsMiner M63S+ 434/436/438T – 436 TH/s Bitcoin Miner, 17W/T

Awaiting product image

WhatsMiner M63S+ 420 TH/s – 17W/T High-Performance Bitcoin Miner

WhatsMiner M63S+ offers 420–428 TH/s hashrate with 17W/T efficiency. A powerful and reliable SHA-256 Bitcoin miner designed for professional mining operations.

Key specifications

Hashrate
420T / 428T
Power draw
7,140–7,276 W (computed — 420T / 428T × 17 J/TH, the same hashrate × efficiency arithmetic MicroBT uses for its own "power on wall" figure. The 17W/T row below is efficiency, not connected load.)
Efficiency
17W/T (17J/TH)
Input voltage
AC 380–480 V, three-phase + ground — MicroBT’s own specification for this model, with a custom power cable of at least 16 A. No single-phase 200–240 V circuit runs this machine at any breaker size.
Cooling
Hydro (liquid) cooling — this unit must be plumbed into a coolant loop. MicroBT publishes no air-cooled variant of this model. It will not run on air, and the loop, CDU/dry cooler and coolant are not included with the miner.
Algorithm
SHA-256
Full specification table

Buying from ING Mining

  • PriceQuoted, not listedWe price this on condition, quantity and freight to your address. Call or email for current price and availability.
  • FreightQuoted with the unitFreight to your address is confirmed with the price, before you pay — multi-unit and pallet orders included.
  • ConditionNewAs described on this listing.
  • GradingGraded before listingThis unit’s own grade is in the description above — where a listing states none, it says so. The six-step bench procedure behind a grade is published in full.
  • WarrantyStated per unit, not per storeAny term for this machine is in the description above. Ask for the return terms on this exact unit before you pay — full terms are in the Shipping & buying tab below.
Get a price+1 (781) 577-0377ns@ingmining.comwho we are

Sold by ING Mining LLC — ING MINING® is a registered U.S. trademark.

Price:

Live Chat
  • Condition graded per unit: new, tested working, refurbished or as-is
  • Warranty and returns stated per unit, not per store
  • Ships UPS Ground within 7 business days

Description

WhatsMiner M63S+ 420 TH/s – 17W/T High-Performance Bitcoin Miner

The WhatsMiner M63S+ 420 TH/s is a next-generation SHA-256 Bitcoin miner built for professional mining operations that require both power and efficiency. With a strong hashrate range of 420–428 TH/s and an optimized efficiency of 17W/T, this model supports consistent and scalable mining performance. MicroBT designed the WhatsMiner M63S+ 420 TH/s to operate reliably in demanding mining environments. Moreover, this is a hydro machine: stable temperatures come from the coolant loop it is plumbed into, not from fans moving room air. As a result, miners can achieve predictable output while minimizing hardware stress. For additional professional ASIC miners and mining hardware solutions, explore the ING Mining product collection, where multiple WhatsMiner models are available for large-scale deployments. In addition, miners can monitor real-time Bitcoin network conditions through Blockchain.com difficulty charts , which helps optimize mining strategies over time.

Specifications

Model WhatsMiner M63S+
Hashrate 420T / 428T
Power consumption 7,140–7,276 W (computed — 420T / 428T × 17 J/TH, the same hashrate × efficiency arithmetic MicroBT uses for its own "power on wall" figure. The 17W/T row below is efficiency, not connected load.)
Efficiency 17W/T (17J/TH)
Algorithm SHA-256
Coins mined BTC, BCH
Cooling Hydro (liquid) cooling — this unit must be plumbed into a coolant loop. MicroBT publishes no air-cooled variant of this model. It will not run on air, and the loop, CDU/dry cooler and coolant are not included with the miner.
Input voltage AC 380–480 V, three-phase + ground — MicroBT’s own specification for this model, with a custom power cable of at least 16 A. No single-phase 200–240 V circuit runs this machine at any breaker size.
Use Case Professional mining farms and industrial Bitcoin mining setups

Before you buy this one: it is a liquid-cooled machine on a three-phase supply. MicroBT rates the M63S+ at AC 380–480 V, three-phase with ground, and publishes it only as a hydro unit — around a litre of coolant per machine, plumbed into a loop with a CDU or dry cooler that you supply. That is two separate things a 240 V air-cooled farm does not have. It is the right machine for a container or a purpose-built hydro room and the wrong machine for a garage or a shed, whatever the breaker is rated at. If you are buying a lot of these and want to know what the loop and the service actually have to be before you commit, call +1 (781) 577-0377 or email ns@ingmining.com and we will go through it with you.

What’s in the box

  • 1 × WhatsMiner M63S+
  • Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Overall, this combines high hashrate output with energy-efficient performance. Furthermore, its durable design and MicroBT engineering make it a dependable solution for miners seeking long-term operational stability. Therefore, this miner is well-suited for modern Bitcoin mining farms worldwide.

Questions buyers ask about this machine

Will this run on a normal household outlet?

No. This machine needs a three-phase AC 380–480 V supply — that is MicroBT’s own rating for it. A North American 120 V household outlet will not run it, and neither will a single-phase 240 V circuit at any breaker size, so there is no breaker calculation to do here: it is a three-phase machine or it is nothing. It also has to be plumbed into a coolant loop before it will run at all. Have an electrician and whoever runs your cooling confirm both before the pallet arrives.

What can I mine with it?

It mines BTC, BCH. The algorithm is SHA-256, and ASIC silicon is single-purpose: it will mine coins on that algorithm and nothing else, whatever the price of anything else does.

Is this a new unit?

Yes — new stock, as described in this listing. Any manufacturer warranty term that applies is stated in the description above; where none is stated, none is claimed.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — we would rather talk before you buy.

Related hardware and where this sits in the store

Other WhatsMiner units to weigh against this one:

Categories: Bitcoin miner, New ASIC miners, Whatsminer BTC Miners and Hydro Cooling.




Where this listing sits

This one is on the new shelf. New stock, as described in the listing. Any manufacturer warranty term that applies is named in the description; where none is named, none is claimed.

What our grades mean

These are the only words we use, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

NewUnused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested workingSecond-hand, and it ran on our bench at the hashrate the listing states. We measured it; we are not repeating what the last owner told us. Expect cosmetic wear.
RefurbishedTested working, plus work done: cleaned, thermal paste and fans dealt with, failed components replaced. The listing says what was actually done to that unit rather than using the word as decoration.
As-is / for partsSold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest. If a listing says as-is, assume it does not hash until you have proved otherwise.
UntestedWe have it, we have not powered it, and we are not going to pretend we did. Rarer than as-is and always stated explicitly.

What a grade here does not mean

  • Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on hardware that has been earning. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
  • A grade is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. A tested-working grade describes what the machine did on our bench, not what we owe you in six months.
  • A boosted hashrate is not a spec. Where a unit ships on tuned firmware we say so and we give the factory figures too, because overclocking raises power faster than it raises hashrate — a tuned machine is less efficient per terahash than stock, not more.
  • We will not invent a grade to fill a field. If a unit came in without history and has not been through the bench, its listing says that.

How the grade gets decided

A used-hardware seller who will not tell you how they test is asking you to take the grade on trust. Ours is published: the six-step bench procedure every machine goes through, and the five measurements that get recorded — per-board hashrate, chip count, measured wall power rather than the nameplate figure, hardware error rate, and temperature under sustained load. When it reaches you, run the 48-hour acceptance test straight away, while the freight claim window is still open.

Buying second-hand for the first time? How to buy a used ASIC miner without getting burned is the long version, written from the repair bench rather than from a spec sheet.

Shipping

This listing is quoted rather than priced, and freight is quoted with it. Tell us where it is going and we will confirm the shipping cost to that address with the price, before you pay — on a multi-unit or pallet order that is the only honest way to do it.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

Then run the 48-hour acceptance test straight away, while that window is still open. It is the same ground our own bench covers, so you can compare like for like: how the grade on this listing was arrived at, and the five measurements we record, are set out in the Condition & grading tab on this page.

Condition, warranty and returns

Condition: New — as described on this listing.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. For what a mining warranty normally covers, see ASIC miner warranty explained.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Where you are going to run it

Two questions decide whether a machine like this works where you live, and neither of them is about the miner: can the circuit carry it, and what does your electricity cost? Most full-size machines here want a dedicated 240 V circuit and run at 70–75 dB continuously. A few do not — the Avalon Q publishes 45–65 dB and runs on 110–240 V — so read the voltage and noise figures on this listing rather than assuming. ASIC miner power requirements covers breaker sizing and what the install actually involves; cooling covers where the heat and the noise end up.

If your power is not genuinely cheap, hosting is the question to be asking instead of which miner to buy. Break-even electricity rate is hashprice divided by (24 × J/TH), and hashrate cancels out of it entirely — which is why a cheap old machine on expensive power loses money faster than an expensive new one does. The buying guide has the arithmetic; work out your own number before you buy anything.

If hosting is the answer, get written answers on three things before you sign: who pays for repairs, what the uptime commitment actually pays out when it is missed, and how curtailment is handled. A flat per-machine monthly rate is where most of the unpleasant surprises live. Types of mining farm compares the models and hosting versus cloud mining covers why owning the hardware is the better end of that trade. Ask us before you commit — it is a five-minute call and a great deal cheaper than a contract you cannot get out of.

What we do once it is racked, wherever that is. Deployment, firmware and monitoring are a service we run rather than a line on a page: pool and network setup, Braiins OS or VNish tuning, offline alerts, and board-level fault-finding when a machine stops hashing — ASIC mining consulting sets out what that covers. The hosting agreement itself is between you and the facility. What we can give you is the number most hosting disputes turn on: what this machine measured at the wall on our bench, so a shortfall on site is a figure to compare against rather than an argument about what it should have been doing.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

Our Related Products

Related products

Type to search