WhatsMiner M60S+ 206 TH/s at 17 W/T

Q: Will this run on a normal household outlet?

No. This machine needs a dedicated 220–240 V circuit. A North American 120 V household outlet will not run it under any adapter or configuration. Have an electrician confirm the supply before the pallet arrives — and note that MicroBT rates this model’s P221B/P222B power supply at AC 220 V–240 V, so a 120/208 V service is below the published minimum rather than merely at the bottom of it.

Description

WhatsMiner M60S+ 206 TH/s – 17W/T Ultra-Efficient Bitcoin Miner

The WhatsMiner M60S+ 206 TH/s is a new-generation SHA-256 Bitcoin miner engineered for maximum efficiency and stable long-term output. This model delivers an impressive 206–210 TH/s hashrate while maintaining a low 17W/T power ratio. As a result, it offers excellent performance for large-scale mining facilities and individual operators who want predictable returns and energy-optimized hardware.

MicroBT designed the M60S+ series to provide stronger cooling, improved processing stability, and cleaner electrical performance. Moreover, the upgraded air-cooling system keeps temperatures steady, even in high-demand 24/7 operations. In addition, the control board offers more accurate monitoring, which helps miners manage uptime and efficiency more easily.

For more ASIC models and verified refurbished units, you can visit the ING Mining product catalog.

To track Bitcoin network difficulty and mining profitability trends, check the Blockchain.com Hashrate Chart , which helps miners plan long-term strategies.

Specifications

Model	WhatsMiner M60S+
Hashrate	206T / 208T / 210T
Power consumption	3,502–3,570 W (computed — 206T / 208T / 210T × 17 J/TH, the same hashrate × efficiency arithmetic MicroBT uses for its own "power on wall" figure. The 17W/T row below is efficiency, not connected load.)
Efficiency	17W/T
Efficiency	17J/TH
Algorithm	SHA-256
Coins mined	BTC, BCH
Cooling	Advanced air cooling
Input voltage	220–240 V AC — MicroBT ships this model with a P221B/P222B PSU rated AC 220 V–240 V and specifies an IEC C19 cord of at least 16 A. A 208 V supply is below that rated minimum; ask before you order for a 120/208 V service.
Best Use Case	Farms, data centers, warehouse mining setups

On the supply: MicroBT ships the M60S+ with a P221B/P222B power supply rated AC 220 V–240 V and an IEC C19 cord of at least 16 A. That matters on a 120/208 V commercial service, which is extremely common in the US: 208 V is below the manufacturer’s rated minimum, not merely at the bottom of it. Plenty of these run on 208 V in the field, but it is outside the published rating, so ask us on +1 (781) 577-0377 before you plan a 208 V deployment rather than after.

What’s in the box

1 × WhatsMiner M60S+
Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Overall, the WhatsMiner M60S+ 206 TH/s stands out as a high-performance, energy-optimized ASIC miner. Furthermore, its combination of strong efficiency, durable construction, and MicroBT reliability makes it an excellent choice for long-term Bitcoin mining. Therefore, miners who want stable hashrate output and manageable energy costs will find this model extremely valuable.

Questions buyers ask about this machine

Will this run on a normal household outlet?

No. This machine needs a dedicated 220–240 V circuit. A North American 120 V household outlet will not run it under any adapter or configuration. Have an electrician confirm the supply before the pallet arrives — and note that MicroBT rates this model’s P221B/P222B power supply at AC 220 V–240 V, so a 120/208 V service is below the published minimum rather than merely at the bottom of it.

What can I mine with it?

It mines BTC, BCH. The algorithm is SHA-256, and ASIC silicon is single-purpose: it will mine coins on that algorithm and nothing else, whatever the price of anything else does.

Is this a new unit?

Yes — new stock, as described in this listing. Any manufacturer warranty term that applies is stated in the description above; where none is stated, none is claimed.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — we would rather talk before you buy.

Related hardware and where this sits in the store

Other WhatsMiner units to weigh against this one:

Categories: Bitcoin miner, New ASIC miners, Whatsminer BTC Miners and Air Cooling.

Where this listing sits

This one is on the new shelf. New stock, as described in the listing. Any manufacturer warranty term that applies is named in the description; where none is named, none is claimed.

What our grades mean

These are the only words we use, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

New	Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested working	Second-hand, and it ran on our bench at the hashrate the listing states. We measured it; we are not repeating what the last owner told us. Expect cosmetic wear.
Refurbished	Tested working, plus work done: cleaned, thermal paste and fans dealt with, failed components replaced. The listing says what was actually done to that unit rather than using the word as decoration.
As-is / for parts	Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest. If a listing says as-is, assume it does not hash until you have proved otherwise.
Untested	We have it, we have not powered it, and we are not going to pretend we did. Rarer than as-is and always stated explicitly.

What a grade here does not mean

Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on hardware that has been earning. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
A grade is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. A tested-working grade describes what the machine did on our bench, not what we owe you in six months.
A boosted hashrate is not a spec. Where a unit ships on tuned firmware we say so and we give the factory figures too, because overclocking raises power faster than it raises hashrate — a tuned machine is less efficient per terahash than stock, not more.
We will not invent a grade to fill a field. If a unit came in without history and has not been through the bench, its listing says that.

How the grade gets decided

A used-hardware seller who will not tell you how they test is asking you to take the grade on trust. Ours is published: the six-step bench procedure every machine goes through, and the five measurements that get recorded — per-board hashrate, chip count, measured wall power rather than the nameplate figure, hardware error rate, and temperature under sustained load. When it reaches you, run the 48-hour acceptance test straight away, while the freight claim window is still open.

Buying second-hand for the first time? How to buy a used ASIC miner without getting burned is the long version, written from the repair bench rather than from a spec sheet.

Shipping

This listing is quoted rather than priced, and freight is quoted with it. Tell us where it is going and we will confirm the shipping cost to that address with the price, before you pay — on a multi-unit or pallet order that is the only honest way to do it.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

Then run the 48-hour acceptance test straight away, while that window is still open. It is the same ground our own bench covers, so you can compare like for like: how the grade on this listing was arrived at, and the five measurements we record, are set out in the Condition & grading tab on this page.

Condition, warranty and returns

Condition: New — as described on this listing.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. For what a mining warranty normally covers, see ASIC miner warranty explained.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Where you are going to run it

Two questions decide whether a machine like this works where you live, and neither of them is about the miner: can the circuit carry it, and what does your electricity cost? Most full-size machines here want a dedicated 240 V circuit and run at 70–75 dB continuously. A few do not — the Avalon Q publishes 45–65 dB and runs on 110–240 V — so read the voltage and noise figures on this listing rather than assuming. ASIC miner power requirements covers breaker sizing and what the install actually involves; cooling covers where the heat and the noise end up.

If your power is not genuinely cheap, hosting is the question to be asking instead of which miner to buy. Break-even electricity rate is hashprice divided by (24 × J/TH), and hashrate cancels out of it entirely — which is why a cheap old machine on expensive power loses money faster than an expensive new one does. The buying guide has the arithmetic; work out your own number before you buy anything.

If hosting is the answer, get written answers on three things before you sign: who pays for repairs, what the uptime commitment actually pays out when it is missed, and how curtailment is handled. A flat per-machine monthly rate is where most of the unpleasant surprises live. Types of mining farm compares the models and hosting versus cloud mining covers why owning the hardware is the better end of that trade. Ask us before you commit — it is a five-minute call and a great deal cheaper than a contract you cannot get out of.

What we do once it is racked, wherever that is. Deployment, firmware and monitoring are a service we run rather than a line on a page: pool and network setup, Braiins OS or VNish tuning, offline alerts, and board-level fault-finding when a machine stops hashing — ASIC mining consulting sets out what that covers. The hosting agreement itself is between you and the facility. What we can give you is the number most hosting disputes turn on: what this machine measured at the wall on our bench, so a shortfall on site is a figure to compare against rather than an argument about what it should have been doing.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

WhatsMiner M60S+ (200–204 TH/s) Bitcoin Miner

WhatsMiner M60S+ 206 TH/s – 16.5W/T Bitcoin Miner

WhatsMiner M60S+ 206 TH/s – 17W/T Bitcoin Miner

Price:

Description