Genuine OEM FANUC A05B-2301-C315 Teach Pendant

Description

A genuine OEM FANUC teach pendant, part number A05B-2301-C315, described by the listing as new open box, fully tested, from Japan.

FANUC A05B-2301-C315 — what it is and what to confirm

Part number	A05B-2301-C315, genuine OEM
Series	A05B-2301 — FANUC’s standard teach pendant: the handheld with the deadman switch, E-stop and menu keys
Controller generations the series spans	R-J3, R-J3iB and R-30iA
What the C315 suffix identifies	One specific display and option build inside the series
Display type	Published references disagree on whether C315 is the monochrome or the colour build, and we are not going to pick the flattering answer and print it as a spec. Ask and we will photograph the actual unit
Confirm before ordering	Your controller model; the A05B number printed on the pendant you are replacing, not the robot’s number; and your software series and edition from the controller status screen. A pendant that is physically identical can refuse to come up on the wrong controller
Origin	Japan, per the listing
Condition	New open box, fully tested, per the listing
Warranty	Not stated in this listing, so none is claimed. Ask and we will tell you what we can put in writing on this exact unit

What this part is

The A05B-2301 series is FANUC’s standard teach pendant — the handheld with the deadman switch, E-stop and menu keys that you jog and program a robot with. It spans the R-J3, R-J3iB and R-30iA controller generations. The C315 suffix identifies one specific display and option build inside that series.

Confirm the suffix against your controller. Do not assume.

Published references disagree on whether C315 is the monochrome or the colour build, and we are not going to pick the flattering answer and print it as a spec. What matters more than the display anyway is that FANUC pendants are matched to a controller generation and often to a software option set — a pendant that is physically identical can refuse to come up, or come up with the wrong function keys, on the wrong controller.

Before you order, have these three ready and send them over:

your controller model (R-J3, R-J3iB, R-30iA …)
the A05B part number printed on the pendant you are replacing, not the robot’s number
your software series and edition from the controller status screen

We will confirm against the label on the actual unit before it ships. That is a two-minute check that prevents the most common failure in this market, which is a correct-looking pendant that will not talk to the controller it arrived for.

Why buying the pendant is usually the right call

A dead pendant stops a robot cell completely — you cannot jog, you cannot recover a fault, you cannot re-teach a point. The cable and the strain relief at the connector are what usually go, followed by the E-stop and deadman switches, which are safety-rated parts and not something to bodge. Replacing the whole pendant with a known OEM unit is faster than a repair and leaves the safety circuit as FANUC certified it.

Also in stock: a second FANUC Robot Teach Pendant – Part Number Not Listed, Ask Before Ordering listed without a part number. Full industrial automation and drives hub, and everything non-mining under surplus and industrial equipment.

What’s in the box

1 × FANUC A05B-2301-C315 Teach Pendant
Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Warranty

This listing does not state a warranty term, so we are not going to imply one — the condition described above is what the listing supports, and nothing here claims more than that. Before you buy, ask us and we will tell you what coverage, if any, we can put in writing on this exact unit. Ask us about this unit.

Questions buyers ask about this pendant

Will this fit my controller?

The A05B-2301 series spans the R-J3, R-J3iB and R-30iA controller generations, and the C315 suffix identifies one specific display and option build inside that series. Send us your controller model, the A05B part number printed on the pendant you are replacing rather than the robot’s number, and your software series and edition from the controller status screen. We confirm against the label on the actual unit before it ships.

Is the display colour or monochrome?

Published references disagree on that for the C315 build, and we are not going to pick the flattering answer and print it as a spec. Ask and we will photograph the actual unit. What matters more than the display anyway is the controller match: a pendant that is physically identical can refuse to come up, or come up with the wrong function keys, on the wrong controller.

What condition is it in, and does it carry a warranty?

The listing describes it as genuine OEM, new open box and fully tested, from Japan, and that is what we are repeating. It states no warranty term, so nothing here claims one. Ask us and we will tell you what coverage, if any, we can put in writing on this unit.

Is it worth replacing the whole pendant rather than repairing one?

Usually, yes. A dead pendant stops a robot cell completely — you cannot jog, recover a fault or re-teach a point. What normally fails is the cable and the strain relief at the connector, followed by the E-stop and deadman switches, which are safety-rated parts and not something to bodge. A known OEM unit is faster than a repair and leaves the safety circuit as FANUC certified it.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — on surplus stock we would much rather answer the question than take a return.

Related hardware and where this sits in the store

Other industrial automation and drive hardware we currently hold:

Categories: Surplus and Industrial Equipment and Industrial Automation and Drives. See everything in Surplus and Industrial Equipment.

Where this listing sits

This is surplus, not mining hardware. We buy equipment lots and estate lots, and things arrive in them that have nothing to do with ASICs. Rather than force them into a miner category they do not belong in, they get listed for what they actually are, in surplus and industrial equipment. The condition of this item is whatever the description on this page says it is — and on several of these listings what it says is that the condition was never stated to us.

What our condition words mean

These are the only words we use, on surplus as much as on machines, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

New	Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested	Second-hand, and it powered up and did what it is meant to do while we had it. What was actually checked is stated on the listing. Expect cosmetic wear.
As-is / for parts	Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest.
Untested	We have it, we have not powered it, and we are not going to pretend we did.
Not stated	The most common answer on this shelf, and the honest one. Equipment lots arrive with no history, so where the listing does not name a condition we do not invent one — ask, and we will photograph the actual item and tell you what we can see.

What a condition here does not mean

Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on equipment that has been in service. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
A condition is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. On surplus, assume there is none unless the listing names one.
A part number on the page is not a part number on the unit. Where a listing quotes a distributor catalogue or a manufacturer record rather than the label in front of us, it says so. Confirm against the actual label before you order anything that has to fit something else.
We will not invent a condition to fill a field. Several of these listings say outright that the import gave us no model number and no condition, and we would rather publish that than a guess that reads better.

How we describe surplus

There is no bench procedure behind these listings and we are not going to imply one. What is behind them is the unit, its labels, and the manufacturer’s own published record for the part number — and where those disagree, or where a distributor catalogue is the only source, the listing says which it is quoting. Before you buy anything on this shelf, ask us: we will photograph the labels on the actual item and put what we can see in writing. It costs us ten minutes and it is the only thing that reliably prevents a return.

Shipping

Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

This is surplus stock rather than mining hardware, so there is no hashrate to verify on arrival. Check it against the part numbers, ratings and condition stated on this listing, and tell us straight away if what arrived is not what the page describes — that is the check that matters on equipment-lot stock, and it is the one we will stand behind.

Condition, warranty and returns

Condition: New, open box — what this listing states, repeated.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. On surplus stock in particular, assume none unless this listing names one.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

Reviews

There are no reviews yet.

Be the first to review “Genuine OEM FANUC A05B-2301-C315 Teach Pendant – New Open Box Fully Tested Japan”

Fully Tested – Allen Bradley PowerFlex 525, CAT: 25B-D6P0N104, 3HP

New Genuine CDK Global LaserStation 6100 Toner Cartridge PN 6017837 OEM Sealed

Genuine OEM FANUC A05B-2301-C315 Teach Pendant – New Open Box Fully Tested Japan

Price:

Description

FANUC A05B-2301-C315 — what it is and what to confirm

What this part is

Confirm the suffix against your controller. Do not assume.

Why buying the pendant is usually the right call