Allen-Bradley PowerFlex 4M 22F-D2P5N103

Description

An Allen-Bradley PowerFlex 4M variable frequency drive, catalogue number 22F-D2P5N103 — a 480 V three-phase, 2.5 A, 0.75 kW (1 HP) open-chassis VFD. The listing states these are tested.

What the catalogue number actually decodes to

Rockwell’s numbering is not decoration, and it is the fastest way to check a surplus drive is the one you need before you buy it:

22F	PowerFlex 4M family
D	480 V AC, three phase input
2P5	2.5 A continuous output
N	No CE-compliant EMC filter
103	IP20 open type, LED display, keypad with potentiometer, no brake

Published ratings

Output	0.75 kW / 1 HP, 2.5 A continuous
Input	480 V AC three phase, 50–60 Hz
Frame	A
Enclosure	IP20, open type — this goes inside a cabinet
Displacement power factor	0.98
Control	Volts/Hertz, RS-485 port
Condition	Tested, per the listing

Two things to check before you order this one

It is the no-filter build. The N is not a detail. If your panel needs a CE-compliant EMC filter you either buy the filtered variant or add an external line filter — you cannot make this drive compliant by wiring it neatly. On a machine that has to pass a European conformity assessment this is the difference between a drop-in and a redesign.

There is no brake and no network. The 4M is the small, cheap, do-one-job end of the PowerFlex range: V/Hz control, an LED display and RS-485. No dynamic braking, no EtherNet/IP. If you are replacing a drive that was doing regenerative stops or reporting to a PLC over Ethernet, this is not a like-for-like swap — look at the PowerFlex 525 instead, which has both.

Rockwell still lists 22F-D2P5N103 as an active part, so this is surplus rather than obsolete stock — spares and documentation are not going anywhere. More industrial automation and drive hardware is in that hub, and everything non-mining we hold is under surplus and industrial equipment.

What’s in the box

1 × Allen-Bradley 22F-D2P5N103 PowerFlex 4M Drive 1HP 0.75kW Tested
Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Warranty

This listing does not state a warranty term, so we are not going to imply one — the condition described above is what the listing supports, and nothing here claims more than that. Before you buy, ask us and we will tell you what coverage, if any, we can put in writing on this exact unit. Ask us about this unit.

Questions buyers ask about this drive

Does this drive have an EMC filter?

No. The N in 22F-D2P5N103 is literally the no-filter code, and it is not a detail: if your panel needs a CE-compliant EMC filter you either buy the filtered variant or add an external line filter. You cannot make this drive compliant by wiring it neatly, and on a machine that has to pass a European conformity assessment that is the difference between a drop-in and a redesign.

What supply does it need?

The D in the catalogue number is 480 V AC three-phase input, 50–60 Hz. It is an IP20 open-type unit rated 0.75 kW / 1 HP at 2.5 A continuous, which means it is designed to go inside a cabinet rather than to be mounted on its own.

Can it replace a drive that reports to a PLC or does braking?

Not like for like. The 4M is the small, cheap, do-one-job end of the PowerFlex range: Volts/Hertz control, an LED display and RS-485, with no dynamic braking and no EtherNet/IP. If the drive you are replacing was doing regenerative stops or talking to a PLC over Ethernet, look at the PowerFlex 525 we also hold instead.

What does “tested” mean on this listing?

It means the listing states these are tested, and that is what we are repeating. The listing does not state a warranty term, so nothing here claims one. Ask us before you buy and we will tell you what coverage, if any, we can put in writing on this exact unit.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — on surplus stock we would much rather answer the question than take a return.

Related hardware and where this sits in the store

Other industrial automation and drive hardware we currently hold:

Categories: Surplus and Industrial Equipment and Industrial Automation and Drives. See everything in Surplus and Industrial Equipment.

Where this listing sits

This is surplus, not mining hardware. We buy equipment lots and estate lots, and things arrive in them that have nothing to do with ASICs. Rather than force them into a miner category they do not belong in, they get listed for what they actually are, in surplus and industrial equipment. The condition of this item is whatever the description on this page says it is — and on several of these listings what it says is that the condition was never stated to us.

What our condition words mean

These are the only words we use, on surplus as much as on machines, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

New	Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested	Second-hand, and it powered up and did what it is meant to do while we had it. What was actually checked is stated on the listing. Expect cosmetic wear.
As-is / for parts	Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest.
Untested	We have it, we have not powered it, and we are not going to pretend we did.
Not stated	The most common answer on this shelf, and the honest one. Equipment lots arrive with no history, so where the listing does not name a condition we do not invent one — ask, and we will photograph the actual item and tell you what we can see.

What a condition here does not mean

Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on equipment that has been in service. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
A condition is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. On surplus, assume there is none unless the listing names one.
A part number on the page is not a part number on the unit. Where a listing quotes a distributor catalogue or a manufacturer record rather than the label in front of us, it says so. Confirm against the actual label before you order anything that has to fit something else.
We will not invent a condition to fill a field. Several of these listings say outright that the import gave us no model number and no condition, and we would rather publish that than a guess that reads better.

How we describe surplus

There is no bench procedure behind these listings and we are not going to imply one. What is behind them is the unit, its labels, and the manufacturer’s own published record for the part number — and where those disagree, or where a distributor catalogue is the only source, the listing says which it is quoting. Before you buy anything on this shelf, ask us: we will photograph the labels on the actual item and put what we can see in writing. It costs us ten minutes and it is the only thing that reliably prevents a return.

Shipping

Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

This is surplus stock rather than mining hardware, so there is no hashrate to verify on arrival. Check it against the part numbers, ratings and condition stated on this listing, and tell us straight away if what arrived is not what the page describes — that is the check that matters on equipment-lot stock, and it is the one we will stand behind.

Condition, warranty and returns

Condition: Tested — what this listing states, and not a new-or-used grade.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. On surplus stock in particular, assume none unless this listing names one.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

Reviews

There are no reviews yet.

Be the first to review “Allen-Bradley 22F-D2P5N103 PowerFlex 4M Drive 1HP 0.75kW Tested”

Allen Bradley 2711C-T6T /Ser. A PanelView Component C600, 6-in, Color TFT, Touch

Eltek LP Telecom DC Power System w/ Rectifiers & Battery Backup Module

Allen-Bradley 22F-D2P5N103 PowerFlex 4M Drive 1HP 0.75kW Tested

Price:

Description