Previous
A FANUC robot teach pendant lying on a wooden bench, its green LCD, blue and grey keypad and red emergency-stop button facing the camera.

FANUC Robot Teach Pendant – Part Number Not Listed, Ask Before Ordering

$1,750.99
Next

Genuine OEM FANUC A05B-2301-C315 Teach Pendant – New Open Box Fully Tested Japan

$599.99
A FANUC teach pendant in its protective wrap, keypad and emergency-stop button visible.

Fully Tested – Allen Bradley PowerFlex 525, CAT: 25B-D6P0N104, 3HP

Allen-Bradley PowerFlex 525 AC drive, 25B-D6P0N104. 380-480 V three-phase, 6.0 A, 2.2 kW / 3 HP, embedded EtherNet/IP and Safe Torque Off, brake IGBT, no EMC filter. Fully tested per the listing.

Price:

$179.99

2 in stock
Add to Wishlist
Add to Wishlist

Buying from ING Mining

  • Shipping$49.99 UPS GroundThe rate the checkout will charge on this item, read from the store’s own shipping settings rather than estimated. Ships from the US within 7 business days.
  • ConditionTestedTested is what this listing states, and that is all it states — it is not a new-or-used grade and nothing here turns it into one.
  • TestingSurplus stock, not bench-testedDescribed from the unit and its own labels, and where this listing states no condition it says so rather than implying one. Ask and we will photograph it before you pay.
  • WarrantyStated per unit, not per storeAny term for this item is in the description above. Ask for the return terms on this exact unit before you pay — full terms are in the Shipping & buying tab below.

Sold by ING Mining LLCING MINING® is a registered U.S. trademark.

Description

An Allen-Bradley PowerFlex 525 AC drive, CAT 25B-D6P0N104380–480 V three-phase, 6.0 A, 2.2 kW (3 HP), described by the listing as fully tested. This is the drive most people are actually looking for when they search surplus Allen-Bradley: current generation, networked, and safety-rated out of the box.

PowerFlex 525 25B-D6P0N104 ratings

Power 2.2 kW / 3 HP — the same rating for normal and heavy duty
Input 380–480 V AC, three phase, 47–63 Hz
Output current 6.0 A continuous, 9.0 A for 60 seconds
Output frequency 0–500 Hz
Frame A
Enclosure IP20 NEMA / open type
EMC filter None — the N in the catalogue number
Brake Brake IGBT included
Network Embedded EtherNet/IP
Safety Safe Torque Off, embedded
Interface Integral keypad, potentiometer, LED display
Displacement power factor 0.98
Condition Fully tested, per the listing

What’s in the box

  • 1 × Allen Bradley PowerFlex 525, CAT: 25B-D6P0N104, 3HP
  • Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Correcting something you will read on other listings

Several resellers describe 25B-D6P0N104 as having an integral EMC filter. It does not. Rockwell’s own product record for this catalogue number says No Filter, and the N in the number is literally the no-filter code — the filtered variants carry a different letter. We are telling you this because if you are buying to a CE requirement, that one wrong word on a spec sheet costs you a machine build.

Why the removable control module matters on used gear

The 525 splits into a power module and a control module that unclips from it. Two practical consequences when you are buying surplus: parameters travel with the control module, so a drive swap on a running line is a five-minute job instead of a reprogramming session; and a unit killed by a power-stage fault can often be recovered by moving a known-good control module across. It is the main reason a used 525 is worth more than a used 4M beyond the raw amp rating.

Also currently held: the smaller PowerFlex 4M 1 HP drive and an Allen-Bradley PanelView Component C600 HMI. Browse the full industrial automation and drives hub.

Warranty

This listing does not state a warranty term, so we are not going to imply one — the condition described above is what the listing supports, and nothing here claims more than that. Before you buy, ask us and we will tell you what coverage, if any, we can put in writing on this exact unit. Ask us about this unit.

Questions buyers ask about this drive

Does 25B-D6P0N104 have an integral EMC filter?

No, whatever you read elsewhere. Several resellers describe this catalogue number as having an integral EMC filter; Rockwell’s own product record says No Filter, and the N in the number is the no-filter code — the filtered variants carry a different letter. If you are buying to a CE requirement, that one wrong word on somebody else’s spec sheet costs you a machine build.

Will it talk to my PLC, and is it safety rated?

Yes on both, and that is the main reason to want a 525 over the smaller drives: EtherNet/IP is embedded rather than an add-on card, Safe Torque Off is embedded, and there is a brake IGBT on board. It is rated 2.2 kW / 3 HP at 6.0 A continuous on a 380–480 V three-phase supply.

Why buy a used 525 rather than a used 4M?

The removable control module. Parameters travel with it, so swapping a drive on a running line is a five-minute job instead of a reprogramming session, and a unit killed by a power-stage fault can often be recovered by moving a known-good control module across. That is worth more than the raw amp rating.

What does “fully tested” mean here, and is there a warranty?

Fully tested is what the listing states, and that is what we are repeating. The listing does not state a warranty term, so nothing on this page claims one. Ask us before you buy and we will tell you what coverage, if any, we can put in writing on this exact unit.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — on surplus stock we would much rather answer the question than take a return.

Related hardware and where this sits in the store

Other industrial automation and drive hardware we currently hold:

Categories: Surplus and Industrial Equipment and Industrial Automation and Drives. See everything in Surplus and Industrial Equipment.




Where this listing sits

This is surplus, not mining hardware. We buy equipment lots and estate lots, and things arrive in them that have nothing to do with ASICs. Rather than force them into a miner category they do not belong in, they get listed for what they actually are, in surplus and industrial equipment. The condition of this item is whatever the description on this page says it is — and on several of these listings what it says is that the condition was never stated to us.

What our condition words mean

These are the only words we use, on surplus as much as on machines, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

NewUnused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
TestedSecond-hand, and it powered up and did what it is meant to do while we had it. What was actually checked is stated on the listing. Expect cosmetic wear.
As-is / for partsSold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest.
UntestedWe have it, we have not powered it, and we are not going to pretend we did.
Not statedThe most common answer on this shelf, and the honest one. Equipment lots arrive with no history, so where the listing does not name a condition we do not invent one — ask, and we will photograph the actual item and tell you what we can see.

What a condition here does not mean

  • Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on equipment that has been in service. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
  • A condition is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. On surplus, assume there is none unless the listing names one.
  • A part number on the page is not a part number on the unit. Where a listing quotes a distributor catalogue or a manufacturer record rather than the label in front of us, it says so. Confirm against the actual label before you order anything that has to fit something else.
  • We will not invent a condition to fill a field. Several of these listings say outright that the import gave us no model number and no condition, and we would rather publish that than a guess that reads better.

How we describe surplus

There is no bench procedure behind these listings and we are not going to imply one. What is behind them is the unit, its labels, and the manufacturer’s own published record for the part number — and where those disagree, or where a distributor catalogue is the only source, the listing says which it is quoting. Before you buy anything on this shelf, ask us: we will photograph the labels on the actual item and put what we can see in writing. It costs us ten minutes and it is the only thing that reliably prevents a return.

Shipping

Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

This is surplus stock rather than mining hardware, so there is no hashrate to verify on arrival. Check it against the part numbers, ratings and condition stated on this listing, and tell us straight away if what arrived is not what the page describes — that is the check that matters on equipment-lot stock, and it is the one we will stand behind.

Condition, warranty and returns

Condition: Tested — what this listing states, and not a new-or-used grade.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. On surplus stock in particular, assume none unless this listing names one.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

Reviews

There are no reviews yet.

Be the first to review “Fully Tested – Allen Bradley PowerFlex 525, CAT: 25B-D6P0N104, 3HP”

Your email address will not be published. Required fields are marked *