New HP CE505JC Black LaserJet Toner Cartridge for P2055 Printer
New, genuine HP CE505JC black LaserJet toner for the P2035 and P2055 families. HP’s contract-channel version of the 05-series cartridge, OEM sealed. Yield figures vary by source – check the box.
A new, genuine HP CE505JC black LaserJet toner cartridge for the LaserJet P2035 and P2055 printer families — P2035, P2035n, P2055d, P2055dn and P2055x.
What the “JC” on the end means
CE505JC is HP’s contract-channel cartridge, not the retail one. HP sells the same physical cartridge into managed-print and contract programmes under a separate part number. It is genuine HP and it drops straight into the same printers; it simply was not packaged for a shelf in a stationery shop. That is the entire difference, and it is why contract SKUs turn up in surplus at all — an office closes, a print contract ends, and the unopened stock has to go somewhere.
Be careful with the yield figure, including ours
Distributor catalogues list CE505JC at 8,000 pages, and some resellers label it as an 05X. Those two claims do not agree, because HP’s published ISO/IEC 19752 yields for the retail cartridges in this family are:
05A — CE505A
2,300 pages, standard yield
05X — CE505X
6,500 pages, high yield
CE505JC
8,000 pages per distributor catalogues — see below
We are quoting a distributor figure, not a number we read off HP’s own datasheet for the JC part, and we would rather say so than round it into a claim. If your decision turns on cost per page, check the yield printed on the box before you commit — and remember every one of those numbers assumes 5% page coverage, which almost nobody actually prints.
Condition
The listing states new and OEM sealed. Toner has a real shelf life: the powder itself keeps for years in a sealed bag, but the drum’s photo sensitivity degrades with light exposure and the wiper blade can take a set if a cartridge has been stored on end for a long time. Store it flat, in the box, away from a window, and let it come up to room temperature before installing it if it has been somewhere cold.
This listing does not state a warranty term, so we are not going to imply one — the condition described above is what the listing supports, and nothing here claims more than that. Before you buy, ask us and we will tell you what coverage, if any, we can put in writing on this exact unit. Ask us about this unit.
What’s in the box
1 × HP CE505JC black LaserJet toner cartridge, OEM sealed per the listing
Nothing that is not listed above. This is the contract-channel cartridge, so do not expect retail packaging, and no printer, drum kit or maintenance part is included — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the box
Questions buyers ask about this cartridge
Which printers does CE505JC fit?
The HP LaserJet P2035 and P2055 families — P2035, P2035n, P2055d, P2055dn and P2055x. It drops straight into the same printers as the retail 05-series cartridge.
Is it genuine HP, or a compatible?
Genuine HP. CE505JC is HP’s contract-channel cartridge rather than the retail one: HP sells the same physical cartridge into managed-print and contract programmes under a separate part number. It simply was not packaged for a shelf in a stationery shop, which is exactly why contract SKUs turn up in surplus at all when an office closes or a print contract ends.
How many pages does it yield?
Be careful with this figure, including ours. Distributor catalogues list CE505JC at 8,000 pages and some resellers label it an 05X, but HP’s own ISO/IEC 19752 yields for the retail cartridges in this family are 2,300 pages for the 05A and 6,500 for the 05X. We are quoting a distributor figure, not a number read off HP’s datasheet for the JC part. If your decision turns on cost per page, check the yield printed on the box before you commit.
Does toner go off in storage?
The powder itself keeps for years in a sealed bag, but the drum’s photo sensitivity degrades with light exposure and the wiper blade can take a set if a cartridge has been stored on end for a long time. Store it flat, in the box, away from a window, and let it come up to room temperature before installing it if it has been somewhere cold.
Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — on surplus stock we would much rather answer the question than take a return.
This is surplus, not mining hardware. We buy equipment lots and estate lots, and things arrive in them that have nothing to do with ASICs. Rather than force them into a miner category they do not belong in, they get listed for what they actually are, in surplus and industrial equipment. The condition of this item is whatever the description on this page says it is — and on several of these listings what it says is that the condition was never stated to us.
What our condition words mean
These are the only words we use, on surplus as much as on machines, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.
New
Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested
Second-hand, and it powered up and did what it is meant to do while we had it. What was actually checked is stated on the listing. Expect cosmetic wear.
As-is / for parts
Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest.
Untested
We have it, we have not powered it, and we are not going to pretend we did.
Not stated
The most common answer on this shelf, and the honest one. Equipment lots arrive with no history, so where the listing does not name a condition we do not invent one — ask, and we will photograph the actual item and tell you what we can see.
What a condition here does not mean
Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on equipment that has been in service. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
A condition is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. On surplus, assume there is none unless the listing names one.
A part number on the page is not a part number on the unit. Where a listing quotes a distributor catalogue or a manufacturer record rather than the label in front of us, it says so. Confirm against the actual label before you order anything that has to fit something else.
We will not invent a condition to fill a field. Several of these listings say outright that the import gave us no model number and no condition, and we would rather publish that than a guess that reads better.
How we describe surplus
There is no bench procedure behind these listings and we are not going to imply one. What is behind them is the unit, its labels, and the manufacturer’s own published record for the part number — and where those disagree, or where a distributor catalogue is the only source, the listing says which it is quoting. Before you buy anything on this shelf, ask us: we will photograph the labels on the actual item and put what we can see in writing. It costs us ten minutes and it is the only thing that reliably prevents a return.
Shipping
Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.
Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.
What to do the day it arrives
Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.
This is surplus stock rather than mining hardware, so there is no hashrate to verify on arrival. Check it against the part numbers, ratings and condition stated on this listing, and tell us straight away if what arrived is not what the page describes — that is the check that matters on equipment-lot stock, and it is the one we will stand behind.
Condition, warranty and returns
Condition: New — what this listing states, repeated.
Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. On surplus stock in particular, assume none unless this listing names one.
Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.
Reviews
There are no reviews yet.