Titan Networx TNSS-2400P 24-Port PoE+ Switch

Description

A Titan Networx TNSS-2400P — a 1U rackmount 24-port PoE+ managed gigabit switch with a 370 W total PoE budget and 4 gigabit SFP combo ports. New in box, per the listing.

TNSS-2400P specifications

Ports	24 × gigabit copper, all PoE+
PoE budget	370 W total across the switch
Uplinks	4 × gigabit SFP combo
Switching bandwidth	56 Gbps
Forwarding rate	1,488,095 pps per port
Management	Web console with VLAN and security features
Chassis	1U steel, 19 in rack
Power	Internal switching supply — no external brick
Condition	New in box

That per-port figure is not marketing: 1,488,095 packets per second is the theoretical line rate of a gigabit link at minimum 64-byte frames, so the switch is claiming wire speed rather than a number someone rounded up.

Read the power budget, not the port count

370 W across 24 ports is about 15 W per port if you load every one. That is comfortable for 802.3af devices and for most single-radio access points and fixed cameras. It is not enough to run 24 PTZ cameras with heaters, or a floor of high-power Wi-Fi 6E APs, which will each want close to the full 30 W of PoE+. Budget your real device draw before you assume 24 usable PoE ports — a switch that browns out under load at 4pm is worse than one that was sized honestly on day one.

Where this fits in a mining room

This is one of the few pieces of surplus we hold that has a direct use in the business we are actually in. A miner shed needs a managed switch with enough ports to give every machine a wired drop and enough VLAN capability to keep miner management traffic off the rest of the network — and the PoE budget covers the cameras and the access point you will inevitably want in the same room. If you are wiring a small site, see what you are wiring it for in the miner catalogue.

More networking and computer hardware, and the whole surplus and industrial equipment section.

What’s in the box

1 × Titan Networx TNSS-2400P 24-Port PoE+ Managed Gigabit Network Switch
Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate

Warranty

This listing does not state a warranty term, so we are not going to imply one — the condition described above is what the listing supports, and nothing here claims more than that. Before you buy, ask us and we will tell you what coverage, if any, we can put in writing on this exact unit. Ask us about this unit.

Questions buyers ask about this switch

Can it really power 24 PoE devices at once?

Read the power budget rather than the port count. 370 W across 24 ports is about 15 W per port if you load every one, which is comfortable for 802.3af devices and for most single-radio access points and fixed cameras. It is not enough for 24 PTZ cameras with heaters, or a floor of high-power Wi-Fi 6E APs, which each want close to the full 30 W of PoE+. Budget your real device draw first.

Does it need an external power brick?

No. It has an internal switching supply in a 1U 19-inch steel chassis, so it racks up with a kettle lead and nothing else. There are four gigabit SFP combo ports for uplinks alongside the 24 copper ports.

Is a switch like this any use in a mining room?

It is one of the few pieces of surplus we hold with a direct use in the business we are actually in. A miner shed needs enough ports to give every machine a wired drop and enough VLAN capability to keep miner management traffic off the rest of the network — and the PoE budget covers the cameras and the access point you will inevitably want in the same room.

What condition is it in?

New in box, per the listing, and that is what we are repeating. The listing states no warranty term, so nothing here claims one. Ask us before you buy and we will tell you what coverage, if any, we can put in writing on this exact unit.

Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — on surplus stock we would much rather answer the question than take a return.

Related hardware and where this sits in the store

Other networking and computer hardware in the same surplus lot:

Categories: Surplus and Industrial Equipment and Networking and Computer Hardware. See everything in Surplus and Industrial Equipment.

Where this listing sits

This is surplus, not mining hardware. We buy equipment lots and estate lots, and things arrive in them that have nothing to do with ASICs. Rather than force them into a miner category they do not belong in, they get listed for what they actually are, in surplus and industrial equipment. The condition of this item is whatever the description on this page says it is — and on several of these listings what it says is that the condition was never stated to us.

What our condition words mean

These are the only words we use, on surplus as much as on machines, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.

New	Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it.
Tested	Second-hand, and it powered up and did what it is meant to do while we had it. What was actually checked is stated on the listing. Expect cosmetic wear.
As-is / for parts	Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest.
Untested	We have it, we have not powered it, and we are not going to pretend we did.
Not stated	The most common answer on this shelf, and the honest one. Equipment lots arrive with no history, so where the listing does not name a condition we do not invent one — ask, and we will photograph the actual item and tell you what we can see.

What a condition here does not mean

Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on equipment that has been in service. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
A condition is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. On surplus, assume there is none unless the listing names one.
A part number on the page is not a part number on the unit. Where a listing quotes a distributor catalogue or a manufacturer record rather than the label in front of us, it says so. Confirm against the actual label before you order anything that has to fit something else.
We will not invent a condition to fill a field. Several of these listings say outright that the import gave us no model number and no condition, and we would rather publish that than a guess that reads better.

How we describe surplus

There is no bench procedure behind these listings and we are not going to imply one. What is behind them is the unit, its labels, and the manufacturer’s own published record for the part number — and where those disagree, or where a distributor catalogue is the only source, the listing says which it is quoting. Before you buy anything on this shelf, ask us: we will photograph the labels on the actual item and put what we can see in writing. It costs us ten minutes and it is the only thing that reliably prevents a return.

Shipping

Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.

Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.

What to do the day it arrives

Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.

This is surplus stock rather than mining hardware, so there is no hashrate to verify on arrival. Check it against the part numbers, ratings and condition stated on this listing, and tell us straight away if what arrived is not what the page describes — that is the check that matters on equipment-lot stock, and it is the one we will stand behind.

Condition, warranty and returns

Condition: New — what this listing states, repeated.

Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. On surplus stock in particular, assume none unless this listing names one.

Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.

Who you are buying from

ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.

Reviews

There are no reviews yet.

Be the first to review “Titan Networx TNSS-2400P 24-Port PoE+ Managed Gigabit Network Switch New in Box”

New HP CE505JC Black LaserJet Toner Cartridge for P2055 Printer

Vintage Wood Lincoln Logs – Mixed Lot Different Makers – Massive Lot 40 Pounds

Titan Networx TNSS-2400P 24-Port PoE+ Managed Gigabit Network Switch New in Box

Price:

Description

TNSS-2400P specifications