Description
An Ericsson RBS 6000 base transceiver station assembly — baseband unit, radio modules and power shelf. This is carrier macro-cell equipment. Read the licensing paragraph before you buy.
This is not networking hardware you can just switch on
RBS 6000 gear does not function as generic equipment outside an operator’s network. The digital unit runs Ericsson software that is node-licensed and provisioned from the operator’s management system; the radios are locked to specific bands and to a licensed carrier configuration; and the whole node expects to be commissioned against an OSS. Buying the hardware does not get you the software, the licences or the commissioning — and transmitting on licensed spectrum without authorisation is illegal in every jurisdiction we ship to.
What people legitimately buy this for is spares for an existing licensed deployment, laboratory and training use, teardown and component recovery, or scrap value. Those are real markets and this is honest stock for them. It is not a home lab LTE network.
What the RBS 6000 architecture consists of
- Digital unit (DUS / DUW) — the baseband. Handles GSM, WCDMA and LTE processing and traffic management, and connects to the radios over CPRI optical links.
- Radio units — RRUS remote radio heads or radio boards in the shelf, each specific to a frequency band and power class.
- Power system — the RBS runs on −48 V DC. A Power Connection Filter brings site DC or battery power in, and a Power Filter Unit stabilises the internal −48 V rail.
- Transport — backhaul, typically fibre or microwave, in its own shelf.
Confirm the exact part numbers before you order
This listing does not identify the DUS or radio variants, and the variant is the whole story with this equipment — a DUS 41 and a DUS 31 are not interchangeable, and a radio for one band is useless for another. Condition and warranty are not stated either. Contact us and we will photograph every label on the actual assembly: the DUS product number, each radio unit’s KRC/KRD number and band, and what is physically present in the shelf.
See also the Eltek −48 V DC power system, which is the class of plant this equipment expects to be fed from. Full telecom and DC power systems hub, within surplus and industrial equipment.
What’s in the box
- 1 × Ericsson RBS 6000 Baseband Unit w/ Radio Modules & Power Shelf
- Nothing that is not listed above. Cords, controllers, brackets and spares are only included when this listing names them — if you need to know before you pay, ask on +1 (781) 577-0377 or ns@ingmining.com and we will confirm in writing what is physically in the crate
Questions buyers ask about this base station
Can I switch this on and run a network with it?
No. RBS 6000 gear does not function as generic equipment outside an operator’s network: the digital unit runs node-licensed Ericsson software provisioned from the operator’s management system, the radios are locked to specific bands and to a licensed carrier configuration, and the node expects to be commissioned against an OSS. Transmitting on licensed spectrum without authorisation is illegal in every jurisdiction we ship to.
Who buys this, then?
Operators and integrators buying spares for an existing licensed deployment, laboratory and training use, teardown and component recovery, and scrap value. Those are real markets and this is honest stock for them. It is not a home lab LTE network, and we would rather say so on the page than in a refund conversation.
Which DUS and radio variants are in this one?
The listing does not identify them, and the variant is the whole story with this equipment — a DUS 41 and a DUS 31 are not interchangeable, and a radio for one band is useless for another. Ask us and we will photograph every label on the actual assembly: the DUS product number, each radio unit’s KRC or KRD number and band, and what is physically present in the shelf.
What does it need for power?
The RBS runs on −48 V DC. A Power Connection Filter brings site DC or battery power in and a Power Filter Unit stabilises the internal rail, which is why this class of equipment is normally fed from telecom DC plant rather than from an ordinary AC supply.
Shipping cost for this exact item, and how warranty and returns work here, are answered in the Shipping & buying tab on this page. Anything else, ask a person on +1 (781) 577-0377 or ns@ingmining.com — on surplus stock we would much rather answer the question than take a return.
Related hardware and where this sits in the store
Other telecom and DC power equipment from the same clear-out:
Categories: Surplus and Industrial Equipment and Telecom and DC Power Systems. See everything in Surplus and Industrial Equipment.
Where this listing sits
This is surplus, not mining hardware. We buy equipment lots and estate lots, and things arrive in them that have nothing to do with ASICs. Rather than force them into a miner category they do not belong in, they get listed for what they actually are, in surplus and industrial equipment. The condition of this item is whatever the description on this page says it is — and on several of these listings what it says is that the condition was never stated to us.
What our condition words mean
These are the only words we use, on surplus as much as on machines, and each one means a specific thing. They are not interchangeable and we do not soften them to move stock.
| New | Unused stock. Factory sealed unless the listing says otherwise — “new, open box” means exactly that, and the listing will say it. |
|---|
| Tested | Second-hand, and it powered up and did what it is meant to do while we had it. What was actually checked is stated on the listing. Expect cosmetic wear. |
|---|
| As-is / for parts | Sold with no working claim at all, at a price that reflects it. Buy these to repair or to harvest. |
|---|
| Untested | We have it, we have not powered it, and we are not going to pretend we did. |
|---|
| Not stated | The most common answer on this shelf, and the honest one. Equipment lots arrive with no history, so where the listing does not name a condition we do not invent one — ask, and we will photograph the actual item and tell you what we can see. |
|---|
What a condition here does not mean
- Cosmetic wear is not a fault. Dust, scratches, scuffed labels and discoloured plastics are normal on equipment that has been in service. We photograph what we have; if the pictures matter to you, ask for more and we will take them.
- A condition is not a warranty. Warranty terms are stated per listing, never per store — see the Shipping & buying tab. On surplus, assume there is none unless the listing names one.
- A part number on the page is not a part number on the unit. Where a listing quotes a distributor catalogue or a manufacturer record rather than the label in front of us, it says so. Confirm against the actual label before you order anything that has to fit something else.
- We will not invent a condition to fill a field. Several of these listings say outright that the import gave us no model number and no condition, and we would rather publish that than a guess that reads better.
How we describe surplus
There is no bench procedure behind these listings and we are not going to imply one. What is behind them is the unit, its labels, and the manufacturer’s own published record for the part number — and where those disagree, or where a distributor catalogue is the only source, the listing says which it is quoting. Before you buy anything on this shelf, ask us: we will photograph the labels on the actual item and put what we can see in writing. It costs us ten minutes and it is the only thing that reliably prevents a return.
Shipping
Shipping this item inside the United States costs $49.99 by UPS Ground — that is the rate the checkout will charge, read from the store’s own shipping settings, not an estimate. Orders ship within 7 business days.
Outside the United States the checkout quotes a flat international rate. On multi-unit or pallet orders, contact us before ordering so freight to your destination can be confirmed properly. What to check when the pallet arrives, and how a freight claim works, is covered in the mining hardware shipping guide.
What to do the day it arrives
Photograph the pallet or the box before you open it, and keep the packaging until you are satisfied. Freight claim windows are short, and damage found on day two is a conversation while damage found on day thirty is an argument.
This is surplus stock rather than mining hardware, so there is no hashrate to verify on arrival. Check it against the part numbers, ratings and condition stated on this listing, and tell us straight away if what arrived is not what the page describes — that is the check that matters on equipment-lot stock, and it is the one we will stand behind.
Condition, warranty and returns
Condition: Condition not stated on this listing, so none is claimed — ask and we will confirm in writing.
Warranty is stated per listing, not across the catalogue. Some units carry a manufacturer term and say so above, naming the term and the date it runs from. Many units, particularly used and AS-IS stock, carry none, and those listings do not claim one. There is no blanket warranty covering a catalogue that runs from sealed factory stock to a hashboard sold for parts. On surplus stock in particular, assume none unless this listing names one.
Returns: ask for the terms on this unit before you pay. No single returns window is published for the whole store, because the sensible terms on a tested working machine and on a board sold AS-IS for parts are not the same terms. Email or call and ask what applies to this exact item — it is a two-minute conversation and a great deal cheaper than a dispute.
Who you are buying from
ING Mining LLC, Hanson, Massachusetts. ING MINING® is a registered U.S. trademark; our marketplace feedback is on the reviews page and the longer version of who we are is on about. Reach a person on +1 (781) 577-0377 or ns@ingmining.com.
Reviews
There are no reviews yet.